Nanoscale dimensioning is fast, cheap with new

A novel technique* under development at the National Institute of Standards and Technology (NIST) uses a relatively inexpensive optical microscope to quickly and cheaply analyze nanoscale dimensions with nanoscale measurement sensitivity. Termed Through-focus Scanning Optical Microscope (TSOM) imaging, the technique has potential applications in nanomanufacturing, semiconductor process control and biotechnology.

Optical microscopes are not widely considered for checking nanoscale (below 100 nanometers) dimensions because of the limitation imposed by wavelength of lightyou cant get a precise image with a probe three times the objects size. NIST researcher Ravikiran Attota gets around this, paradoxically, by considering lots of bad (out-of-focus) images. This imaging uses a set of blurry, out-of-focus optical images for nanometer dimensional measurement sensitivity, he says. Instead of repeatedly focusing on a sample to acquire one best image, the new technique captures a series of images with an optical microscope at different focal positions and stacks them one on top of the other to create the TSOM image. A computer program Attota developed analyzes the image.

While Attota believes this simple technique can be used in a variety of applications, he has worked with two. The TSOM image can compare two nanoscale objects such as silicon lines on an integrated circuit. The software subtracts one image from the other. This enables sensitivity to dimensional differences at the nanoscaleline height, width or side-wall angle. Each type of difference generates a distinct signal.

TSOM has also been theoretically reviewed in another quality control application. Medical scientists are studying the use of gold nanoparticles to deliver advanced pharmaceuticals to specific locations within the human body. Perfect size will be critical. To address this application, a TSOM image of a gold nanoparticle can be taken and in comparison to a library of simulated images to obtain best-match images with the intent of determining if each nanoparticle passes or fails.

This new imaging technology requires a research-quality optical microscope, a camera and a microscope stage that can move at preset distances. The setup is easily under $50,000, which is much less expensive than electron or probe microscopes currently used for measuring materials at the nanoscale, Attota explains. This method is another approach to extend the range of optical microscopy from microscale to nanoscale dimensional analysis. So far, sensitivity to a 3 nm difference in line widths has been demonstrated in the laboratory.


Posted by: Kevin    Source