Digital circuits

The conceptual design above could be implemented using a variety of different technologies. As previously mentioned, a stored program computer could be designed entirely of mechanical components like Babbage's. However, digital circuits allow Boolean logic and arithmetic using binary numerals to be implemented using relays - essentially, electrically controlled switches. Shannon's famous thesis showed how relays could be arranged to form units called logic gates, implementing simple Boolean operations. Others soon figured out that vacuum tubes - electronic devices, could be used instead. Vacuum tubes were originally used as a signal amplifier for radio and other applications, but were used in digital electronics as a very fast switch; when electricity is provided to one of the pins, current can flow through between the other two.

Through arrangements of logic gates, one can build digital circuits to do more complex tasks, for instance, an adder, which implements in electronics the same method - in computer terminology, an algorithm - to add two numbers together that children are taught - add one column at a time, and carry what's left over. Eventually, through combining circuits together, a complete ALU and control system can be built up. This does require a considerable number of components. CSIRAC, one of the earliest stored-program computers, is probably close to the smallest practically useful design. It had about 2,000 valves, some of which were "dual components", so this represented somewhere between 2 and 4,000 logic components.

Vacuum tubes had severe limitations for the construction of large numbers of gates. They were expensive, unreliable (particularly when used in such large quantities), took up a lot of space, and used a lot of electrical power, and, while incredibly fast compared to a mechanical switch, had limits to the speed at which they could operate. Therefore, by the 1960s they were replaced by the transistor, a new device which performed the same task as the tube but was much smaller, faster operating, reliable, used much less power, and was far cheaper.

Integrated circuits are the basis of modern digital computing hardware.

In the 1960s and 1970s, the transistor itself was gradually replaced by the integrated circuit, which placed multiple transistors (and other components) and the wires connecting them on a single, solid piece of silicon. By the 1970s, the entire ALU and control unit, the combination becoming known as a CPU, were being placed on a single "chip" called a microprocessor. Over the history of the integrated circuit, the number of components that can be placed on one has grown enormously. The first IC's contained a few tens of components; as of 2005, modern microprocessors such from AMD and Intel contain over 100 million transistors.

Tubes, transistors, and transistors on integrated circuits can be used as the "storage" component of the stored-program architecture, using a circuit design known as a flip-flop, and indeed flip-flops are used for small amounts of very high-speed storage. However, few computer designs have used flip-flops for the bulk of their storage needs. Instead, earliest computers stored data in Williams tubes - essentially, projecting some dots on a TV screen and reading them again, or mercury delay lines where the data was stored as sound pulses traveling slowly (compared to the machine itself) along long tubes filled with mercury. These somewhat ungainly but effective methods were eventually replaced by magnetic memory devices, such as magnetic core memory, where electrical currents were used to introduce a permanent (but weak) magnetic field in some ferrous material, which could then be read to retrieve the data. Eventually, DRAM was introduced. A DRAM unit is a type of integrated circuit containing huge banks of an electronic component called a capacitor which can store an electrical charge for a period of time. The level of charge in a capacitor could be set to store information, and then measured to read the information when required.